Differences

This shows you the differences between two versions of the page.

--- data:dust_cesm [2017/10/16 15:19] – Added the Download section jypeter
+++ data:dust_cesm [2019/11/18 11:44] (current) – Replaced files links with sharebox links jypeter
@@ Line 1: / Line 1: @@
 ====== PMIP4 CESM dust data ======
+<WRAP center round important 60%>
+The ''conc'' data files were updated on February 26th 2019 (see //conc// in the 3D part of the [[#variables|Variables]] section below). Make sure you use the correct version of the data!
+</WRAP>
+===== Contact =====
+Information and data provided by [[samuel.albani@unimib.it|Samuel Albani]]
 ===== Data files =====
+  * each variable for each climate period is in a separate file. In the ''conc'' (dust concentration) case, which contains the three-dimensional dust concentration in the atmosphere, ancillary variables are also included in the same file, i.e. those necessary to fully describe the vertical coordinate (lev, ilev, hyai, hybi, hyam, hybm, PS)
   * file names = ''PMIP4_DUST_Albani_<field>_<expt>.nc''
     * ''field'' = see [[#variables|Variables]] section below
-    * ''expt'' = ''PI'', ''MH'' or ''LGM''
+    * ''expt'' = ''PI'' (pre-Industrial), ''MH'' (mid-Holocene) or ''LGM'' (Last Glacial Maximum)
       * The gaussian weights file does not depend on the experiment: ''PMIP4_DUST_Albani_gw.nc''
 ===== Dimensions =====
-  * nb_time = 12 (12 monthly time steps in each file)
+  * nb_time = 12
-  * nb_lat, nb_lon = 192, 288
+    * 12 time steps in each file, corresponding to the climatological monthly averages (with the exception of ''erod'', the soil erodibility variable), indicated as days since 2020-01-01 00:00:00. They are assumed to all have equal weight
+    * time = [ 14, 44, 74, … 284, 314, 344 ]
+  * nb_lat, nb_lon = 192, 288 (0.95 x 1.25 degrees)
     * latitude_values = [ -90, -89.05759, -88.11518, ... 88.11518, 89.05759, 90 ]
     * longitude_values = [ 0, 1.25, 2.5, ... 356.25, 357.5, 358.75 ]
   * size_bin = 4 (dust particle size classes)
     * dust size bin edges = 0.1, 1.0, 2.5, 5.0, 10.0 μm (diameters)
+    * size values = [1, 2, 3, 4]
+      * ''1'' = 0.1-1.0 µm, ''2'' = 1.0-2.5 µm, ''3'' = 2.5-5.0 µm, ''4'' = 5.0-10.0 µm (diameters)
   * nb_levels = 26 hybrid sigma-pressure levels
+    * only for the ''conc'' variable
     * check the ''PMIP4_DUST_Albani_conc_<expt>.nc'' files for details about the hybrid coordinates
+===== Variables =====
+==== 2D dust fields ====
+  * **erod**: Soil erodibility
+    * soil_erodibility
+    * dimensions: [latitude, longitude]
+    * units: binary (''0'' or ''1'')\\ ''0'' = non-erodible grid cell\\ ''1'' = erodible grid  cell
+  * **emis**: Dust emission flux (size-resolved)
+    * tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_emission
+    * dimensions: [time, size, latitude, longitude]
+    * units: kg m-2 s-1
+  * **load**: Dust load (size-resolved)
+    * atmosphere_mass_content_of_dust_dry_aerosol_particles
+    * dimensions: [time, size, latitude, longitude]
+    * units: kg m-2
+  * **aot**: Dust Aerosol Optical Thickness (size-resolved) at 550 nm
+    * atmosphere_optical_thickness_due_to_dust_dry_aerosol_particles
+    * dimensions: [time, size, latitude, longitude]
+    * units: 1 (//unitless//)
+  * **ddep**: Dust dry deposition flux (size-resolved)
+    * tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_dry_deposition
+    * dimensions: [time, size, latitude, longitude]
+    * units: kg m-2 s-1
+  * **wdep**: Dust wet deposition flux (size-resolved)
+    * tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_wet_deposition
+    * dimensions: [time, size, latitude, longitude]
+    * units: kg m-2 s-1
+  * **rfts**: Dust Direct Radiative Forcing (TOA, SW)
+    * toa_net_downward_shortwave_radiative_forcing_due_to_dust_dry_aerosol_particles
+    * dimensions: [time, latitude, longitude]
+    * units: W m-2
+  * **rftl**: Dust Direct Radiative Forcing (TOA, LW)
+    * toa_net_downward_longwave_radiative_forcing_due_to_dust_dry_aerosol_particles
+    * dimensions: [time, latitude, longitude]
+    * units: W m-2
+  * **rfss**: Dust Direct Radiative Forcing (surface, SW)
+    * surface_net_downward_shortwave_radiative_forcing_due_to_dust_dry_aerosol_particles
+    * dimensions: [time, latitude, longitude]
+    * units: W m-2
+  * **rfsl**: Dust Direct Radiative Forcing (surface, LW)
+    * surface_net_downward_longwave_radiative_forcing_due_to_dust_dry_aerosol_particles
+    * dimensions: [time, latitude, longitude]
+    * units: W m-2
+==== 3D dust field ====
+  * **conc**: Dust concentration (size resolved)
+<WRAP center round important 60%>
+The actual units of the ''conc'' variable in the downloadable NetCDF files (**μg m-3**) were not consistent with the units listed in the files metadata (**kg m-3**) and the variable description below.
+Corrected files (where a scaling factor of 1.e-9 was applied to the data of the previous files) were uploaded on February 26th March 2019.
+The Download section at the end of this page lists both the crossed out md5sum **checksum** of the old files, and the checksum of the new files. The new files also have a new //comment// global attribute saying ''This file REPLACES the previous file that had a md5sum of xxxxxxx''
+</WRAP>
+    * mass_concentration_of_dust_dry_aerosol_particles_in_air
+    * dimensions: [time, size, lev, latitude, longitude]
+    * units: kg m-3
+The ''PMIP4_DUST_Albani_conc_<exp>.nc'' files also store the ancillary variables necessary to fully describe the vertical coordinate
+  * **ilev**: hybrid level at interfaces (1000*(A+B))
+    * atmosphere_hybrid_sigma_pressure_coordinate
+    * dimensions: [ilev]
+    * units: 1
+    * p(n,k,j,i) = a(k)*p0 + b(k)*ps(n,j,i)
+    * a: hyai b: hybi p0: P0 ps: PS
+  * **PS**: Surface pressure
+    * surface_air_pressure
+    * dimensions: [time, latitude, longitude]
+    * units: Pa
+  * **hyam**
+    * hybrid A coefficient at layer midpoints
+  * **hybm**
+    * hybrid B coefficient at layer midpoints
+  * **hyai**
+    * hybrid A coefficient at layer interfaces
+  * **hybi**
+    * hybrid B coefficient at layer interfaces
 ===== References =====
 <WRAP center round important 60%>
-Please cite **all** following papers
+Please cite **at least one** of the following papers
 </WRAP>
   * Albani, S., Mahowald, N. M., Perry, A. T., Scanza, R. A., Zender, C. S., Heavens, N. G., Maggi, V., Kok, J. F., and Otto-Bliesner, B. L.: **Improved dust representation in the Community Atmosphere Model**, J. Adv. Model. Earth Syst., 6, 541–570, doi:[[http://onlinelibrary.wiley.com/doi/10.1002/2013MS000279/abstract|10.1002/2013MS000279]], 2014.
+    * Note: this paper describes the LGM simulation
   * Albani, S., Mahowald, N. M., Winckler, G., Anderson, R. F., Bradtmiller, L. I., Delmonte, B., François, R., Goman, M., Heavens, N. G., Hesse, P. P., Hovan, S. A., Kang, S., Kohfeld, K. E., Lu, H., Maggi, V., Mason, J. A., Mayewski, P. A., McGee, D., Miao, X., Otto-Bliesner, B. L., Perry, A. T., Pourmand, A., Roberts, H. M., Rosenbloom, N., Stevens, T., and Sun, J.: **Twelve thousand years of dust: the Holocene global dust cycle constrained by natural archives**, Clim. Past, 11, 869-903, doi:[[http://www.clim-past.net/11/869/2015/|10.5194/cp-11-869-2015]], 2015.
+    * Note: this paper describes the mid-Holocene simulation
   * Albani, S., Mahowald, N. M., Murphy, L. N., Raiswell, R., Moore, J. K., Anderson, R. F., McGee, D., Bradtmiller, L., Delmonte, B., Hesse, P. P., and Mayewski, P. A.: **Paleodust variability since the Last Glacial Maximum and implications for iron inputs to the ocean**, Geophys. Res. Lett., 43, doi:[[http://onlinelibrary.wiley.com/doi/10.1002/2016GL067911/abstract|10.1002/2016GL067911]], 2016.
+    * Note: this paper describes the pre-Industrial simulation and compares it to the mid-Holocene and LGM simulations in previous papers
 ===== Download =====
@@ Line 36: / Line 137: @@
 You will find below a table with all the available data files, and their //md5sum// checksum (if you want to check that you download was OK, you can just type ''md5sum file.nc'' and compare the result to what is displayed in the table).
-If you want to download a file, click on the [[https://files.lsce.ipsl.fr/public.php?service=files&t=b6b071abebaef0c6e1994ec6e0a78753|PMIP4 CESM dust data download link]] and then on the file you need.
+If you want to download a file, click on the [[https://sharebox.lsce.ipsl.fr/index.php/s/Tqd86W5SsCxLDki|PMIP4 CESM dust data download link]] and then on the file you need.
 /*  The files are currently protected by a password.Get in touch with [[pmip3web@lsce.ipsl.fr|Jean-Yves Peterschmitt]] if you need to access them. */
@@ Line 44: / Line 145: @@
 | a99c8627d21cdc67ab989437b0808e00 | PMIP4_DUST_Albani_aot_MH.nc |
 | 118d105d29a7da31e5a443fba87c4e96 | PMIP4_DUST_Albani_aot_PI.nc |
-| 5fa086e300324080614db8175b223220 | PMIP4_DUST_Albani_conc_LGM.nc |
+| 0e8fb61f0eea7dd9beb756312ee440cb\\ Do not use files that have the crossed out md5sum below\\ <del>5fa086e300324080614db8175b223220</del> | PMIP4_DUST_Albani_conc_LGM.nc |
-| e7c929737c681bde8cde11198578af9e | PMIP4_DUST_Albani_conc_MH.nc |
+| 3864a144e192eaaa2f0920a32725ac77\\ Do not use files that have the crossed out md5sum below\\ <del>e7c929737c681bde8cde11198578af9e</del> | PMIP4_DUST_Albani_conc_MH.nc |
-| bf0baa1a003a2d85d306d62e2b5f20f9 | PMIP4_DUST_Albani_conc_PI.nc |
+| 038ccdb03dd0bf34a96c8912d59d9463\\ Do not use files that have the crossed out md5sum below\\ <del>bf0baa1a003a2d85d306d62e2b5f20f9</del> | PMIP4_DUST_Albani_conc_PI.nc |
 | 3727a77888c8809a0f87c8e51e37668b | PMIP4_DUST_Albani_ddep_LGM.nc |
 | 568f5f2ecc516a618b27aebbf6ac8475 | PMIP4_DUST_Albani_ddep_MH.nc |